BRAVO 20

USE

It is an ideal solution for the preparation of quality drinking water. The appliance can be installed under the kitchen counter and is intended exclusively for drinking water or water used for cooking and preparation.

DESCRIPTION

The drinking water purifier consists of a double housing in which two quality filter cartridges are installed.

​

• the first filter cartridge is mechanical with a permeability of 5 mcr. It is intended for protection against sludge, various sediments, sand, rust and against all solid particles larger than 5 mcr.

​

• the second filter cartridge is made of activated carbon (sintered carbon block 0.3 mcr) and is intended against: chlorine, pesticides, insecticides, improves the smell and taste of water and retains all solid particles larger than 0.3 mcr. The insert allows a flow of approx. 4 m3 of water, then it must be replaced with a new one.

​

• Fliter works ANTIBACTERIAL and BACTERIOSTATIC , as it keeps all bacteria larger than 0.3 mcr

​

​

​

KIT CONTAINS

• double filter housing,

• mechanical filter insert 5 mcr.

• Activated carbon filter cartridge (carbon block 0.3 mcr),

• wall filter bracket

• wrench for tightening and unscrewing the filter pot,

• screws for screwing the filter holder to the filter head.

• stand-alone faucet,

• manifold with valve,

• and pipelines.

​

MAINTENANCE AND INSTALLATION

The inlet and outlet connections of the water purifier are R 1/4. The mechanical filter cartridge must be replaced every 6 months. Carbon block filter insert 0.3 mcr. however, it needs to be replaced by 12  months or at least 4m3 of water consumed.

​

Water filters made of plastic and brass and components of these materials which come into contact with drinking water shall be manufactured in accordance with Directive 80/778 / EEC for consumption and production procedure.

CONDITIONS FOR OPERATION AND INSTALLATION

​

• Connections  with: 6.32mm (1/4 ''),

• Operating temperature: 4 ° C-45 ° C

• Max. working pressure at cold water: 8 bar

• Sealing: O-ring; replacement seal code: 88428

• Insert type: SX and BX